(1) The driving of traveling crane and milling and mixing device are all hydraulic transmission.

(2)行走速度和銑拌轉子轉速均可以無級調速。

(2) The traveling speed and milling rotor speed can be adjusted steplessly.

(3)行走系統采用前、后輪驅動其中(DGL系列為前橋驅動，WB系列為前、后橋驅動)，全液壓轉向。

(3) The traveling system adopts front and rear wheel drive (DGL series is front axle drive, WB series is front and rear axle drive), and full hydraulic steering.

(4)銑拌轉子的提升和下降、尾門的開啟和關閉均由電磁閥操縱。

(4) The lifting and lowering of milling rotor and the opening and closing of tail gate are controlled by solenoid valve.

(5)駕駛室采用密封式，帶空調設備，雙方向盤，蔽華數控儀表臺，很大程度上地改進了駕駛員的作業環境。

(5) The cab adopts sealed type, with air-conditioning equipment, dual steering wheel and Guihua CNC instrument panel, which greatly improves the driver's working environment.

(6)本機前后輪驅動輪胎選用了寬基低壓工程機械輪胎，牽引型花紋。抗振性能好，可以獲得更大的牽引力。

(6) The front and rear wheel drive tires of the machine are wide base low-pressure construction machinery tires with traction patterns. Good anti vibration performance and greater traction can be obtained.

平時我們常見的路面就是水泥路和瀝青路，冷再生機在維護這兩種路面時有哪些區別？

At ordinary times, our common roads are cement roads and asphalt roads. What are the differences between the cold recycling machine in maintaining these two kinds of roads?

1、水泥冷再生

1. Cement cold recycling

水泥冷再生充分利用廢舊材料，并按比例加入一定量的添加劑在自然環境溫度下就地連續地完成材料的銑刨、破碎、拌合、攤鋪及壓實成型，冷再生租賃從而修筑出具有所需性能質量的新基層。

The cold recycling of cement makes full use of waste materials, adds a certain amount of additives in proportion, and continuously completes the milling, crushing, mixing, paving and compaction of materials at the natural ambient temperature, so as to build a new base with required performance and quality.

與傳統施工方法相比，水泥冷再生成本低、效率高、質量好，可減少污染。

Compared with traditional construction methods, cement cold regeneration has the advantages of low cost, high efficiency and good quality, which can reduce pollution.

2、瀝青冷再生

2. Asphalt cold regeneration

瀝青路面冷再生將舊路銑刨、剝離所得的回收瀝青路面材料，經破碎篩分，抽提測定油石比、礦料級配組成及回收瀝青的性能指標后，按新的瀝青再生混合料配合比設計，適當加入部分新骨料、水、乳化瀝青等，在常溫條件下（不加熱）拌制新的瀝青路面材料。冷再生技術可以降低成本10-20%左右，且生產效率非常高。

Cold recycling of asphalt pavement: the recycled asphalt pavement materials obtained from milling and stripping of the old road are crushed and screened, extracted and determined to determine the asphalt aggregate ratio, mineral aggregate gradation composition and performance indexes of the recycled asphalt. According to the mix proportion design of the new asphalt recycled mixture, some new aggregate, water and emulsified asphalt are appropriately added to mix the new asphalt pavement materials under normal temperature (without heating). Cold regeneration technology can reduce the cost by about 10-20%, and the production efficiency is very high.

以上就是為大家介紹的有關冷再生機租賃的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.ebagshop.com.cn

The above is a detailed introduction to the leasing of cold regenerator. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.ebagshop.com.cn